6 in Morse code is —····, written as -..... Like all Morse code numbers, it uses exactly five signals — no more, no less. This five-signal structure is the defining feature of the entire number system and the reason numbers are easy to learn as a complete set rather than ten separate memorisations.
The Complete Morse Number Pattern
All ten digits follow a strict mathematical pattern. Once you understand the rule, you can generate any Morse number instantly:
- 1–5 — start with dots. The number of leading dots equals the digit. 1 = ·————, 2 = ··———, 3 = ···——, 4 = ····—, 5 = ·····
- 6–9 and 0 — start with dashes. 6 = —····, 7 = ——···, 8 = ———··, 9 = ————·, 0 = —————
6 is in the dashes-first (6–0) group. 6 starts with 1 dash followed by 4 dots.
Why All Morse Numbers Use 5 Signals
Numbers in Morse code are longer than most letters by design. Letters range from 1 to 4 signals. Numbers are all 5. This length difference serves a practical purpose: when receiving Morse at speed, five-signal patterns stand out from letter patterns, making numbers easy to identify even before you decode which specific digit it is.
In the telegraph era, numbers appeared constantly in commercial messages — prices, quantities, dates, account numbers. The uniform 5-signal structure made numbers reliable to transmit and count. A telegraph operator knew immediately they were receiving a number (five signals) versus a letter (one to four signals).
All Ten Morse Numbers Together
Here is the complete set — viewing them together makes the pattern obvious:
-----.----..---...--....-.....-....--...---..----.The mirror symmetry between 1–4 and 9–6 is exact: 1 and 9 are each other's inverses (·———— vs ————·), as are 2 and 8, 3 and 7, 4 and 6. Only 5 (all dots) and 0 (all dashes) have no mirror partner.
Where 6 Appears in Real Morse Communication
Numbers are not optional knowledge for any serious Morse operator. They appear in:
- Amateur radio callsigns — every callsign contains a number. Callsigns containing 6 are assigned to operators in specific ITU regions worldwide.
- RST signal reports — every on-air contact begins with a Readability (1–5), Strength (1–9), Tone (1–9) report. The digit 6 appears in strength and tone reports of common signal conditions.
- Frequency coordination — when two stations agree to move frequencies, the numbers are sent in Morse.
- 73 and 88 — "best regards" and "love and kisses" are the most transmitted number sequences in Morse history. 73 is the standard farewell in every CW contact.
Practising Numbers — Best Approach
Learn all ten digits together after the alphabet is solid — typically after 2–3 weeks of daily letter practice. The pattern makes this achievable in a single focused session: once the dots-first / dashes-first rule clicks, all ten digits are derivable on the spot.
Practice sequence:
- Learn the pattern rule (not the individual codes)
- Practise your phone number in Morse using the Translator
- Practise today's date in Morse
- Drill random 4-digit sequences in the Practice mode
- Test recognition in the Quiz Level 6 (numbers only)
Six — Where Dashes Begin
6 (—····) switches from the dots-first to dashes-first group: one leading dash then four dots. This is the mirror of 4 (····—) — the same five signals, the dash just moved from the end to the start. The transition point at 6 is worth memorising as an anchor: 5 is all dots, 6 is the start of dashes. Once you know 5 (·····) and 6 (—····), you can derive any number by counting: 7 has two dashes (——···), 8 has three (———··), 9 has four (————·), 0 has five (—————).
6 appears in 160 metres (1.8 MHz), 60 metres (5 MHz experimental), and in 6-metre VHF. W6, K6, N6 callsigns cover California and Nevada — one of the most populous amateur radio areas globally. The Pacific coast operators are frequently the first US contacts for operators in Japan and the Pacific.
Connecting 6 to Your Full Morse Number Knowledge
The Learn page covers numbers in Lessons 9–11. The Quiz Level 6 tests numbers specifically — 10 questions, all digits, 18 seconds per question. The Practice mode includes numbers in random rotation once you enable them.
Numbers in Morse are best learned as a system. Once the pattern rule is clear (dots for 1–5, dashes for 6–0), return to the Numbers in Morse Code overview for the complete picture of where numbers fit in real Morse communication.